Figure 2-184.
TM 5-3610-286-20
WARNING
When working on high-voltage components, always have an additional person
present, and keep one hand away from equipment to reduce hazard of current
flowing through vital organs of body. Remove all jewelry from fingers, wrist,
and neck prior to working on electrical components. Failure to do so may
result in death or serious bums.
Adjust two upper and lower locking nuts (1) on connecting rod (2) so as to leave 0.3 mm
clearance above and below bolt (3).
If necessary, loosen electromagnetic switch mounting (4) and position up or down until
bolt spring (5) pulls up absolutely straight.
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install ranger drum cams (para. 2-67).
(2) Install lever latch assembly (para. 2-71).
(3) Install lower guard (O/S) (para. 2-19).
(4) Install upper guard (O/S) (para. 2-18).
(5) Install main guard (D/S) (para. 2-20).
2-383
