TM 5-3610-286-20
2-68.
Electromagnetic Switch (cont).
c. Install. (figure 2-163)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Install stud (1) with flat washer (2) and nut (3).
Install stop lever (4), two needle bushings (5), flat washer (6), and retaining ring
(7) on stud (1).
Install guide pIate (8), flat washer(9), and cap screw (10).
Install shock absorber (11) and stop bolt (12).
Install push rod (13).
Install stud (14) in stop Iever (4). Install flat washer (15) and retaining ring (16) on
stud (1).
Install fixing plate (17) with two ribbed washers (18) and two cap screws (19).
Install magnet (20), pin (21), and two flat washers (22). Install cotter pin (23) in end of
pin.
Install two cap screws (24), two flat washers (25), and two nuts (26).
Connect tagged wires to magnet (20) and remove tags. Engage and twist collar on
cable (27).
d. Adjust. (figure 2-163). Adjust switch with pull rail assembly using procedure in paragraph 2-
50. Refer to figure 2-163 for location of adjustable switch parts.
NOTE
FOLLOW-ON MAINTENANCE
Install lower guard and accessories (para. 2-19).
2-360
