TM 5-3610-286-20
2-52.
Front Lay Assembly.
This task covers:
a Replace
b. Repair
c. Adjust
INITIAL SETUP
Tools
8 mm combination wrench
10 mm combination wrench
13 mm combination wrench
5 mm hex key
8 mm hex key
Feeler gage
a.
b.
2-268
Replace. (figure 2-115)
(1) Remove socket-head screw (1) and lay cover plate (2).
(2) Remove two socket-head screws (3), washers (4), two hex-head screws (5), and front
guide (6).
(3) Remove springs (7), clip (8), washer (9), and pin (10).
(4) install pin (10), washer (9), and clip (8).
(5) Install front guide (6), two hex screws (5), washers (4), and socket-head screws (3).
(6) install cover plate (2) and socket-head screws (1).
Repair. (figure 2-115)
(1) Replace damaged lay cover plate (2) and front guide (6).
(2) Replace broken or weak springs (7).
