TM 5-3610-286-20
2-49.
Pull Side Lay Assembly (cont).
f. Adjust. (figure 2-108)
(1)
(2)
(3)
(4)
(5)
(6)
Set up graduated disc for timing-adjustment measurements (para 2-96).
Unpin pull side lay cam (1) (located behind pinion gear (2) on D/S side plate) and remove
four socket-head screws (3) from gear (2).
Rotate cam until pull wheels rise off pull rail and go up at a reading of 83°30’ to 84° on the
graduated disc.
Check clearance to side lay cover of 0.1 m m.
Repair cam (1) and replace four socket-head screws (3) in gear (2).
Remove graduated disc (para. 2-98).
2-256
