TM 5-3610-286-20
2-49.
Pull Side Lay Assembly (cont).
e. Install. (figure 2-107)
(1)
(2)
(3)
(4)
(5)
(6)
2-254
Slightly raise O/S end of assembly and slide shafts (1) into D/S side frame.
Install threaded taper pin (2) and two socket-head screws (3).
Install lever (4) and pin (5).
Install support piece (6), two washers (7), and two socket-head screws (8).
Install register feed guard (9), V-ring (10), washers (11), socket-head screws (12),
knurled screw (13), and two adjustment knobs (14).
Install pointer (15) and two screws (16).
