Figure 2-71.
TM 5-3610-286-20
(2) Vibrator roller and bearing assembly (D/S). (figure 2-71)
(a) Replace hex nut (1), knurled collar (2), pin (3), spring (4), hex spacer (5), and hex
nut (6).
(b) Replace pin (7), seal (8), and D/S vibrator roller lever (9).
(e) Replace disk washer (10), retaining ring (11), washer (12), and retaining ring (13).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install dampening fountain assembly (para. 2-37).
(2) Install dampening fountain and ductor rollers (TM 5-3610-286-10).
2-185
