Figure 2-68.
TM 5-3610-286-20
2-35.
Vibrator Roller and Bearing Assembly (cont).
(2) Vibrator roller and bearing assembly (O/S). (figure 2-68)
(a) Remove retaining ring (l), washer (2), retaining ring (3), and disk washer (4).
(b) Remove O/S vibrator roller lever (5), seal (6), and pin (7).
(c) Remove hex nut (8), hex spacer (9), spring (10), pin (11), knurled collar
hex nut (13).
2-182
(12), and
