TM 5-3610-286-20
2-35.
Vibrator Roller and Bearing Assembly.
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
Equipment Conditions
Ball-peen hammer
Dampening fountain roller and dampening ductor
4 mm pin punch
roller removed (TM 5-3610-286-10)
13 mm combination wrench
Dampening fountain assembly removed (para. 2-37)
Retaining-ring pliers
a. Remove.
(1) Vibrator roller and bearing assembly (D/S). (figure 2-67)
(a) Remove retaining ring (1), washer (2), retaining ring (3), and disk washer (4).
(b) Remove D/S vibrator roller lever (5), seal (6), and pin (7).
(c) Remove hex nut (8), hex spacer (9), spring (10), pin (11), knurled collar (12), and
hex nut (13).
2-180
