Figure 2-69.
TM 5-3610-286-20
b. Repair. (figure 2-69)
(1) Remove washer (1) and needle bushings (2) and replace frozen bushings.
(2) Remove spring tension pin (3) and roller box (4) and replace damaged box.
(3) Remove grease fittings (5) and replace damaged fitting.
NOTE
Steps (4) through (7) are performed on O/S vibrator roller lever only.
(4) Remove spring tension pin (6), pin (7), collar (8), latch (9) and replace worn latch.
(5) Remove hex bolt (10) and lock nut (11).
(6) Replace hex bolt (10) and lock nut (11).
(7) Replace latch (9), collar (8), pin (7), and spring tension pin (6).
(8) Replace grease fitting (5).
(9) Replace roller box (4) and spring tension pin (3).
(10) Replace needle bushings (2) and washer (1).
2-183