TM 5-3610-286-20
2-26.
Oscillator Lever Assemblies (cont).
b. Repair. (figure 2-42)
(1) Remove spring pin (1) and set collar (2).
(2) Remove bushing (3), hex screw (4), washer (5), and lever clamp (6).
(3) Remove spring pins (7) and cam followers (8) from oscillator lever (9).
(4) Remove screw (10) and oil distribution plate (11) from bearing housing (12).
(5) Remove washers (13), spring (14), spring pin (15), and spring rod (16).
(6) Remove bushing (17) from rod head (18).
(7) Replace any broken, cracked, distorted, missing, or excessively worn items removed or
disassembled in steps (1) through (6) or in paragraph a, steps (1) through (9) above.
(8) Replace bushing (17) in rod head (18).
(9) Replace spring rod (16) and spring pin (15) in rod head (18).
(10) Replace washers (13) and spring (14) on rod (16).
(11) Replace oil distribution plate (11) and hex screw (10) on bearing housing (12).
(12) Replace cam followers (8) and spring pins (7) on oscillator lever (9).
(13) Replace bushing (3), lever clamp (6), washer (5), and hex screw (4).
(14) Replace set collar (2) and spring pin (1).
2-126
