TM 5-3610-286-20
2-26.
Oscillator Lever Assemblies (cont).
c. Install. (figure 2-43)
(1) Install spring rod assembly (1), spring rod guide (2), washer (3), and hex
screw (4).
(2) Install washer (5) and retaining ring (6).
(3) Install bearing housing (7), washer (8), and three socket-head screws (9).
(4) Install screw (10), flange (11), retaining ring (12), and washer (13).
(5) Install bushing (14), six washers (15), and socket-head screws (16).
(6) Install pull rod (17), washer (18), and hex nut (19).
(7) Install oscillator lever (20).
(8) Install retainer washers (21) and spanner nuts (22).
(9) Install washer (23), crown nut (24), and spring pin (25).
(10) Aline oscillator and tighten hex screw (26).
NOTE
FOLLOW-ON MAINTENANCE
Install main guard assembly (D/S) (para. 2-20).
2-128
