TM 5-3610-286-10
3-6.
DUST CATCHER MAINTENANCE INSTRUCTIONS (CONT)
CLEANING
1.
Unlatch four retaining latches (1) and remove filter box (2) from
housing (3).
2.
Remove filter (4) from filter box (2).
3.
Knock end of filter (4) against heel of hand several times to remove
dust .
NOTE
The following step is only necessary if filters are heavily
coated with dust and dirt.
4.
Move filter (4) back and forth several times in solution of lukewarm
water and detergent. Rinse thoroughly in clear water and air-dry.
5.
Wipe inside of filter box (2) clean with rag.
6.
Insert filter (4) into filter box (2).
7.
Install filter box (2) on housing (3) and latch.
3-25
