TM 5-3610-286-10
3-5. DAMPENING ROLLERS MAINTENANCE INSTRUCTIONS (CONT)
Materials/Parts
Roller bearing (appendix B, section II, item 2)
Talc (appendix D, item 70)
Spacer piece (appendix B, section II, item 4)
Razor blade (appendix D, item 5)
Roller cover (appendix D, item 16) (or other suitable roller cover)
General Safety Instructions
WARNING
EXPOSED MOVING PARTS.
All adjustments will be made while
Printing Press is on SAFETY STOP except those authorized by this
manual to be made with Printing Press running.
Printing Press
must be on safe at all times when not in motion.
Always shout
“clear” and wait for “clear" response before taking Printing
Press off safe to inch or run. Failure to follow this warning
may result in serious injury.
Use above dampening roller schematic to identify rollers in the
following procedures.
3-20
