TM 5-3610-285-14
b.
Remove one screw from each of four clips. Loosen other screws.
c.
Turn clips 90 to right or left.
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
d.
Remove glass surface.
e.
Remove fluorescent lamp in front of starter.
f.
Remove starter by pushing in and turning left until free.
g.
Install new starter in socket by pushing in and turning right until locked.
h.
Reinstall fluorescent lamp.
i.
Reinstall glass surface.
j.
Turn clips to secure glass surface. Aline holes and reinstall screws. Tighten all screws.
k.
Plug in power cord
and
turn power switch ON.
8-10.4. Replace Glass Surface.
MOS: 83E, Photo Layout Specialist
TOOLS: Cross Tip Screwdriver
SUPPLIES: Glass Surface
8-14
