TM 5-3610-285-14
e.
Remove defective fluorescent lamp.
f.
Install new fluorescent lamp.
g.
Reinstall glass surface.
h.
Turn clips to secure glass surface. Aline holes and reinstall screws. Tighten all screws.
i.
Plug in power cord and turn power switch ON.
8-10.3. Replace Starter.
MOS: 83E, Photo Layout Specialist
TOOLS: Cross Tip Screwdriver
SUPPLIES: Starter
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before servicing.
a.
Turn power switch OFF and unplug power cord.
8-13
