TM 5-3610-285-14
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before servicing.
a.
Turn power switch OFF and unplug power cord.
b.
Remove one screw from each of four clips. Loosen other screws.
c.
Turn clips 90 to left or right.
WARNING
Use care when handling damaged glass. Failure to do so may result in serious cuts.
d.
Remove damaged glass surface.
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
NOTE
Prior to installing new glass surface, glass holding channel must be free of dirt and broken pieces of glass.
e.
Install new glass surface.
f.
Turn clips to secure glass surface. Aline holes and reinstall screws. Tighten all screws.
g.
Plug in power cord and turn power switch ON.
8-15
