TM 5-3610-285-14
c. Tag and disconnect four wires from vacuum pump rocker switch.
d. Push in spring clip retainer around rocker switch and remove defective switch through the top of the
control box.
e. Install new switch through the top of the control box and snap into place.
f. Reconnect four wires to new switch.
g. Reinstall cover plate on underside of vacuum control box.
h. Plug in power cord for vacuum control box.
6-16.5 Replace Vacuum Bleed Valve.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Tool Kit, Light Machine Repair
Flat Tip Screwdriver
Combination Wrench Set
SUPPLIES: Vacuum Bleed Valve
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before servicing.
6-42
