TM 5-3610-285-14
d.
Remove plug from pump motor.
e.
Disconnect hose between processor and replenisher storage tanks.
f.
Loosen strainer caps to vent hose.
g.
Disconnect hose from pump and drain excess liquid from hoses.
h.
Remove two hex bolts and flat washers that attach pump unit to chassis. Remove pump.
i.
Loosen top nut retaining capacitor screw to pump.
j.
Move capacitor to side and disconnect wiring. Remove capacitor.
k.
Remove wingnuts and outer pump housing.
l.
Remove inner housing and impeller assembly.
m.
Remove 0-ring and discard.
5-211
