TM 5-3610-285-14
NOTE
Measure and record distance between gear and end of shaft.
b.
Loosen setscrew and remove gear and key from roller shaft.
c.
Remove three nuts connecting left end plate to tie rods.
d.
Remove two screws and washer connecting guide shoe support to left side plate.
e.
Remove two screws connecting tie rods to left side plate. Remove left side plate.
f.
Remove roller assemblies from right side plate.
g.
Unscrew and remove bearing studs and nuts from end plates.
h.
Remove main roller bearings from left side plate.
5-205
