TM 5-3610-285-14
(3) Remove two retaining screws from each side of lamp drawer handle.
(4) Pull drawer out as far as it will go.
(5) Wearing white gloves, install metal halide exposure lamp into fuse clips.
(6) Slide lamp drawer all the way back into cabinet.
(7) Reinstall two retaining screws to hold drawer in place.
(8) Close lower cabinet door and turn door locking knob to lock door.
(9) Reinstall safety screw on lower cabinet door.
d. Installation of glass light shield.
CAUTION
Glass light shield must be installed or lamp will overheat .
(1) Pull the frame release knob out and flip glass frame into a vertical position.
2-15
