TM 5-3610-257-14
5-16.6. Replace Faucet Pump.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
SUPPLIES: Faucet Pump
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
servicing.
a.
Unplug power cord.
b.
Drain watch tank and sink.
c.
Loosen hose clamps and disconnect all three hoses.
d.
Remove screw from support bracket.
e.
Remove four holddown screws.
f.
Disconnect pump leads in junction box.
g.
Remove pump with check valve and gate valve still attached.
h.
Remove plumbing from defective pump and install on new pump.
i.
Install replacement pump. Fasten bracket and four holddown screws.
j.
Connect wires in distribution box.
k.
Connect hoses, tighten hose clamps, and remove hose blocking clamps.
l.
Plug in power cord.
5-37