TM 5-3610-257-14
5-16.9. Replace Auxiliary Fan.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: Flat Tip Screwdriver
Combination Wrench Set
Crimping Tool
SUPPLIES: Fan
In-Line Splices (2)
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
servicing.
a.
Unplug power cord.
b.
Unlatch and remove front cover
c.
Cut shrink wrapping back until splices from fan motor leads are exposed. Cut
d.
Remove screws holding fan bracket to sink and remove fan with bracket.
e.
Remove screws and bracket from defective fan and install on new fan.
f.
Install new fan with bracket and screws.
g.
Splice fan wires together.
h.
Install front cover and secure with latch.
i.
Plug in power cord.
5-40
