TM 5-3610-25314
ad. Lift motor and cutter assembly as a unit back into shredder and secure
with four mounting bolts, lockwashers, and nuts.
ae. Reinstall basket overfill switch and secure with screws.
af. Reinstall overfill indicating flap.
ag. Remove top cover and thread cable into junction box on drive motor.
Secure cable by tightening plastic strain relief.
ah. Reconnect four direction switch wires in junction box and secure
cover with four screws.
ai. Reinstall relay and secure with two screws.
aj. Reattach cable with cable clamps at front of cutter assembly.
ak. Reconnect two red wires to terminals on blower housing.
al. Reinstall paper entry hopper and secure by tightening socket head
capscrews.
am. Reconnect wires to safety cover switch on top cover.
an. Reinstall top cover and secure with one screw through center rear of
machine.
ao. Move shredder against wall and secure with mounting bolts.
ap. Plug in power cord.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Flat Tip Screwdriver
(4 mm to 17 mm) Hex Head Key Wrench Set
SUPPLIES: Cooling Fan
WARNING
Death or serious injury may occur from electrical shock unless power
is secured before servicing.
Unplug power cord.
a.
b. Remove top cabinet cover retaining screw. Lift cover up.
4-45
