TM 5-3610.253-14
Table 4-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CUTTING BLADES DO NOT ROTATE.
Step 1.
Check position of safety cover.
(a) If cover is closed, proceed to step 2.
(b) Close safety cover.
Step 2.
Check position of direction switch.
(a) If switch is properly positioned, proceed to step 3.
(b) Turn direction switch to position "1" or position "R".
Step 3.
Check position of key switch.
(a) If switch is in position "1", proceed to step 4.
(b) Turn key switch to position "1".
Check to see if power cord is plugged in.
Step 4.
(a) If power cord is plugged in, proceed to step 5.
(b) Plug in power cord.
Step 5.
Check for full wastebasket.
Empty wastebasket.
assigned for this equipment.
4-15
