TM 5-3610-253-14
OPERATION UNDER USUAL CONDITIONS
a.
Starting unit.
Turn key to right, to "1" position.
(1) Insert key into key switch.
Turn direction switch to "l" (forward).
NOTE
Maximum of 10 sheets may be fed at one time. Books, etc. greater than 15
sheets must be taken apart.
(2) Feed material to be shredded into the paper shredder by sliding it
over paper entry and under protective plastic cover. Material falls into feed
hopper and is shredded by cutting unit.
Turn direction switch to "0" position. Turn key
b. Shutting unit down.
switch to "0" position.
Clearing jammed paper. In the event of overfeeding, the shredder blades
c.
will stop if you immediately turn the direction switch to the "R" position. The
paper will be ejected into the feed hopper. It can then be divided into smaller
units and refed after direction switch is set back to "l" position. However, if the
motor does stop, you must wait approximately 1 minute before setting the direction
switch to "R" position and ejecting the paper.
This equipment is designed for operation
4-7. OPERATION UNDER UNUSUAL CONDITIONS.
only in a controlled environment.
4-13
