TM 5-3610-253-14
i.
Place supporter spring in position and replace two screws.
Position supporter spring rod on supporter.
j.
k. Plug in power cord.
3-10.5 Adjust Clincher.
MOS: 83F, Photolithographer
TOOLS: Flat Tip Screwdriver
3/4 in. Wrench
Adjust clincher.
a.
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
(1) Unplug power cord.
(2) Remove clincher slide retaining screw.
(3) Loosen plunger setscrew.
(4) Turn plunger to left or right, raising or lowering plunger.
3-36
