ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039A-12&P
4-5. Explanation of Table Entries.
a. Item Number column. Numbers in this column are for reference. When completing DA Form 2404 or
DA Form 5988-E (Equipment Inspection and Maintenance Worksheet), include the item number for the
check/service indicating a fault. Item numbers also appear in the order that you must do checks and services
for the intervals listed.
b. Interval column. This column tells you when you must do the procedure listed in the procedure column.
BEFORE operation procedures must be done before you operate or use the equipment for its intended
mission. AFTER operation procedures must be done immediately after you have operated or used your
equipment.
c. Item to be Inspected column. This column provides the item to be checked or serviced.
d. Procedure column. This column gives the procedure you perform to check or service the item listed in the
Item to be Inspected column so you know if the equipment is ready or available for its intended mission or
for operation. You must do this procedure at the time stated in the Interval column.
e. Equipment Not Ready/Available If column. Information in this column tells you what faults will keep your
equipment from being capable of performing its primary mission. If you make check and service procedures
that show fault listed in this column, do not operate the equipment until it is repaired or becomes fully
operational. Follow standard operating procedures for maintaining the equipment or reporting equipment
failure.
f. Other Table Entries. Be sure to observe all special information and notes that appear in your PMCS table.
4-3
