TM 5-6675-328-14
a.
Turn CHARGING RATE switch to OFF.
b.
Unplug power cord.
c.
Remove screws, handle, and case wrapper.
d.
Remove nut and washer and disconnect diode pigtail.
e.
Remove nut from diode stud and remove diode.
f.
Coat new diode and heat sink mounting areas with heat sink compound.
g.
Install new diode, reinstall nut, and torque to 90 to 110 lb in. (10 to 12.4 N.m)
h.
Connect diode pigtail.
i.
Reinstall case wrapper, handle, and screws.
7-25/(7-26 blank)
