TM 5-6675-326-14
11-9.2 Replace Latch (Recessed Cup Type) - Continued
REMOVAL:
a. Remove nut and washer from latch.
b.
Remove nut, actuator, and locking device from housing.
c.
Remove handle/shaft and cup.
INSTALLATION:
a.
Inspect and replace cup-type latch.
b. Reinstall handle/shaft and cup. Secure to housing.
c.
Reinstall locking device on actuator. Secure with nut.
d.
Reinstall washer and nut on latch.
11-9.3 Replace Hinge (Piano)
PERSONNEL REQUIRED: 1 Topographic instrument repair specialist MOS 41B
TOOLS: 3/8 in. electric drill
5/32 in. twist drill bit
Riveter
MATERIALS/PARTS: Piano hinge
Rivets
Change 1
11-7
