TM 5-6675-326-14
11-8 ORGANIZATIONAL TROUBLESHOOTING.
There is no troubleshooting at the organizational level for the furniture and cabinets.
11-9 ORGANIZATIONAL MAINTENANCE PROCEDURES.
This section contains step-by-step instructions covering organizational maintenance procedures.
11-9.1 Replace Latch (Handle-Type)
PERSONNEL REQUIRED: 1 Topographic instrument repair specialist MOS 41B
TOOLS: 9/16 in. socket-head screw key
9/64 in. flat-tip screwdriver
Punch and Ball-peen hammer
MATERIALS/PARTS: Handle-type latch
Upper latch rod
Lower latch rod
REMOVAL:
a.
Remove nut from holding plate.
b.
Remove latch rod holding plates and latch rods.
c.
Remove side latch plate.
Change 1
11-5
