TM 5-6675-326-14
2-10.2 Replace Film Rollers - Continued
INSTALLATION:
a.
Install new film rollers on assembly.
b. Reinstall assembly and secure with screw.
2-10.3 Collimation.
MOS: 41 B, Topographic Instrument Repair Specialist
TOOLS: Autocollimator
Adjustable Wrench
9/64 in. Flat Tip Screwdriver
NOTE
Make sure that all attaching hardware is tight before attempting to collimate
split-stage light table.
Collimation should be performed after movement to new site or when tests
indicate collimation is-required.
a. Collimation equipment will not fit optical mount properly, unless setscrews are removed from the opti-
cal mount first.
b.
Mount autocollimator in optical mount.
Change 1
2-37