TM 5-6675-323-14
(4) Use printout to verify program, and load magnetic card.
k. Recording program on magnetic card.
(1) ManualIy enter desired program into calculator memory (paragraph 9-6.2i).
(2) Obtain printout to verify program.
key.
(a) Press
and P R I N T : P R G M k e y .
(b) Press
NOTE
If printout does not verify program, repeat steps (1) and (2).
I f display does not show 000 or 001, press
(3) Set PRGM/RUN switch to PRGM.
key.
( 4 ) Select unclipped and unmarked m a g n e t i c c a r d f r o m p a c k e t o f c a r d s .
CAUTION
Hold magnetic card by the edge. Be sure hands are clean. Grease, oil,
a n d other materials can damage magnetic card.
Damage
Do not continue to hold card after it is grasped by feed mechanism.
t o magnetic card may occur.
(5) Load side one of magnetic card through reader. If display indicates
E R R O R , press any key to clear.
(6) Pass side one through reader again. If calculator displays Crd, reverse
card and load side two.
(7) Print out program to verify.
(8) Mark magnetic card to identify program.
(9) To protect contents of magnetic card from being erased, cut corners of
card along notches.
9-49
