TM 5-6675-323-14
Secure with screw on end of each film roller.
Reinstall
film
rollers.
y.
P l u g in power cord and turn power on.
z.
Adjust light grid intensity (paragraph 6-20.1).
aa.
Reinstall front cover on power panel and tighten two screws.
ab.
ac.
Collimate split-stage light table (paragraph 6-20.12).
41B, Topographic Instrument Repair Specialist
MOS:
Autocollimator
TOOLS:
A d j u s t a b l e Wrench
9/64 in. Flat Tip Screwdriver
NOTE
Make sure that all attaching hardware is tight before attempting to
collimate split-stage light table.
C o l l i m a t i o n should be performed after movement to new site or when tests
indicate collimation is required.
Mount autocollimator in optical mount.
a.
6-77
