TM 5-6675-323-14
Remove capscrews to release front plate from end plates.
j.
k.
Remove screws and washers securing front plate.
Move d e f e c t i v e g r i d u n t i l w i r e s a r e a c c e s s i b l e i n s i d e l i g h t b o x .
l.
Disconnect green w i r e .
Loosen capscrews a n d washers and remove middle roller as an assembly
m.
from view stage. Attach to new grid assembly.
S p l i c e r e d w i r e s f r o m new grid assembly to exposed red wire from
n.
defective assembly. Thread new wires to transformer terminal.
o.
D e s o l d e r old wires from terminal and remove from splice. Solder new
wires to transformer terminal. Attach green wire to ground.
p.
G r o u n d ON/OFF switch to table chassis. Plug in power cord. Turn main
p o w e r switch ON.
Turn ON/OFF switch to ON. C h e c k t h a t g r i d a s s e m b l y l i g h t s . T u r n m a i n
q.
power switch to OFF. Unplug power cord.
r.
Reinstall front plate and secure with screws and washers.
s.
Reinstall ON/OFF switch assembly. Secure with screws.
t.
Aline stage separation knob and view stage. Secure with screw.
u.
Reinstall stage separation plate and secure with screws.
Reinstall end plates and brackets. Secure to left view stage with
v.
Secure to right view stage with screws.
screws.
w.
Reinstall center accumulator roller.
x.
Raise bottom plate and secure with knobs.
6-76