TM 5-6675-323-14
Disconnect wires from bottom of terminals 4 and 6.
g.
h. Cut wire ties on terminal assembly.
i.
Cut wires at fan grid assembly as close as possible to fan. Discard old
wiring.
j. Remove nuts and washers securing fan.
k. Remove defective fan.
Retain sponge gasket.
l.
Thread wires for new fan through housing. Attach terminal lug of white
wire to terminal 6 and brown wire to terminal 4.
m.
Install new fan with old gasket in place. Secure with nuts and washers.
n.
R a i s e power panel and secure to main power switch backplate with screws.
o.
Reinstall main power switch and secure with bezel retaining clip.
Reinstall quick-disconnect to power panel.
p.
Reinstall connector below fan and secure with two screws.
q.
r.
P l u g in power cord and turn power on.
6-73
