TM 5-6675-323-14
b. Direct pen storage.
WARNING
To avoid possible injury to fingers, always turn plotter off when directly
storing pens.
(1) Turn off plotter.
(2) Select pen color to be placed in stable 1 and remove cap.
(3) Place pen tip into round boot at base of stable.
(4) Press pen down and in gently until holder snaps in place.
(5) Check that pen color shows through hole in front panel above pen.
(6) Repeat this procedure for remaining pens.
NOTE
P e n s may be removed from stable by moving metal lever to right of pen with
o n e hand, grasping pen between thumb and index finger of other hand, and
pulling out and up.
(7) Turn on plotter.
3-67
