TM 5-6675-319-14
CAUTION
Never have printer hood down with power on and normal room lights on.
This condition will damage PMT.
a .
Turn off MASTER POWER switch.
b . T u r n o f f c i r c u i t b r e a k e r.
c .
Remove screws holding operator’s console to frame.
d. Move control panel so that you have easy access to RASTER edge control
assembly.
e .
Remove screws that mount circuit card rack to operator’s console,
and move rack assembly aside being careful not to break any wires.
f. Remove screws that mount RASTER edge control assembly to operator’s
c o n s o l e.
g.
Open operator’s console.
h. Tag and desolder wiring to defective RASTER edge control potentiometer.
9-155
