(g) Measure distance between two marks and adjust paper advance
a c c o r d i n g l y.
(h) Reverse marker assembly.
NOTE
If single copy of negative is required, follow steps (30) through (34).
If multiple copies of negative are required, proceed to step (35).
(30) Lower and lock hood, and expose printing material .
NOTE
Exposure light glows during exposure and is extinguished when exposure is
complete.
(31) After exposure is complete, unlock and raise hood.
(32) After paper advances, cut exposed material from roll and process.
(33) Rethread printing material to RPT take-up roll .
( 3 4 ) I f p r i n t s o f o t h e r n e g a t i v e s a r e r e q u i r e d , p o s i t i o n n e x t n e g a t i v e on
print stage and repeat steps (30) through (33).
NOTE
If printing process is complete, proceed to step (36) for printer securing
o p e r a t i o n s.
(35) When multiple prints of selected negative are desired, proceed as
f o l l o w s :
CAUTION
APL print counter should not be manually moved in negative direction.
This causes excessive wear in APL print counter.
(a) Set APL print counter to one more than desired number of prints.
(b) Turn on LIFTER POWER switch.
(c) Press button on APL print counter.
(d) Close and lock printer hood.
(e) Set APL single/multiple print switch to MULTIPLE and printing
operation becomes automatic.
9-39
TM 5-6675-319-14
