TM 5-6675-318-14
b.
Remote site.
Assemble and prepare the equipment (selecting the remote mode)
at the remote site in accordance with paragraphs 4-6.1 and 4-6.2.
c.
Establish radio communications.
(1) Assemble and prepare radio, AN/GRC-106-H, in accordance with
520-12.
Input/output from the MX1502 satellite surveyor to the AN/GRC 106.
PIN A -
PIN B -
PIN E -
PIN F -
PIN H -
PIN J -
PIN L -
PIN M -
PIN P -
RADIO OUT RETURN
RADIO IN RETURN
FM OUTPUT (10 MV RMS TO 50 OHMS)
AM OUTPUT (19.5 MV RMS TO 200 OHMS)
PHONE LINE OUTPUT (USE WITH TRANSFORMER) 600 OHMS
KEY
SIGNAL RETURN
RADIO IN (USED FOR AM OR FM)
PHONE LINE IN
TM 11-5820-
(2) Perform a communications check between the control and remote sites to
v e r i f y p r o p e r o p e r a t i o n.
d.
Connect radios to control and remote sites.
(1) Connect the radios at the control and remote sites to the MODEM
INTERFACE connector on the side of the receiver/processor.
4-71
