TM 5-6675-318-14
Table 4-6. CODE 63 DISPLAY FOR 3D POSITION - Cont
Reference Latitude
Press the enter (E) key.
Display shows the longitude in degrees, minutes, and
seconds of the reference position using the satellite datum.
Reference Longitude
Press the enter (E) key.
Display shows the geodetic height in meters of the
reference position using the satellite datum.
Reference Geodetic Height
Press the enter (E) key to display the translocation position. Refer to code 73.
Translocation Display
(3) Rewind the pass data (one site) tape, when all satellite data is
collected, by entering 49, then remove, label, and store the cassette.
g .
If all data has been collected, perform your after PMCS, Table 4-1.
4-69
