TM 5-6675-318-14
c. The following steps should precede any troubleshooting procedures involving
the interior of the plotter:
(1) Check that all switches are in proper positions for normal operation.
(2) Be sure that HP-IB Interface and computer are connected.
(3) Be sure that computer has power.
(4) Place pen in each stall.
3 - 2 8 . 1 Interior of Plotter. For those tests or inspections required inside the
plotter, open the plotter.
a.
Unscrew hood retaining screws and remove rear hood.
b. Center plotter arm on platen and unscrew upper deck locking screws.
3-228
