TM 5-6675-318-14
f. Holding it taut, apply tape perpendicular to panel skin. Do not apply
with rolling motion either end-to-end or center-to-ends. Do not rub
each strip in place individually. Apply all strips lightly with proper
overlap and rub into place.
If necessary, damaged tape can be replaced; however, it should be
g.
removed with careful peeling motion to avoid damage to sealant. If
Complete
sealant also peels back, new sealant should be applied.
Permanent repair by direct
removal of old sealant is not necessary.
s u p p o r t , or higher category of maintenance, should be made as soon as
possible.
1-16.14 Replace Tiedown Socket.
MOS:
8 3 F J 6 , Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
TOOLS :
Cross Tip Screwdriver
Flat Tip Screwdriver
SUPPLIES:
T i e d o w n Socket
a.
R e m o v e screws from tiedown socket.
b.
Pry defective socket from floor.
I n s t a l l n e w t i e d o w n s o c k e t . R o t a t e new tiedown socket enough to avoid
c.
installing screws in old screw holes.
d. Reinstall screws.
1-73
