TM 5-6675-316-14
Table 8-3. DIRECT/GENERAL SUPPORT TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. WAX IS MELTED, BUT AMBER OPERATE PILOT LIGHT WILL NOT COME ON - Cont
Step 2.
Check for continuity through amber OPERATE pilot light.
(a) If continuity is present, proceed to step 3.
(b) Replace operate pilot light (paragraph 8-20.4).
Step 3.
See malfunction 3, step 2.
8. AMBER OPERATE PILOT LIGHT AND MOTOR SWITCH ARE ON, BUT ROLLERS DO NOT TURN<
Step 1.
Check for continuity through MOTOR switch.
(a) If there is no continuity, replace MOTOR switch (paragraph
8-20.5).
(b) If there is continuity through MOTOR switch, replace motor
(paragraph 8-20.1).
(c) If malfunction is not corrected, proceed to step 2.
8-45
