TM 6-6675-316-14
Table 8-3. DIRECT/GENERAL SUPPORT TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. WAX COATER
Be sure that
or damage to
IS INOPERATIVE - Cont
CAUTION
wax coater is unplugged before performing any continuity checks,
meter may result.
Step 2.
Check continuity through power cable.
(a) If continuity exists, proceed to step 3.
(b) If there is no continuity or continuity is intermittent,
replace power cable (paragraph 8-20.9).
Step 3.
Turn HEAT ON switch ON.
Check for continuity across switch
terminals.
Replace switch (paragraph 8-20.5).
8-40
