TM 5-6675-316-14
Table 8-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Numbed
- Hundreds of Hours
D . During
M - Monthly
S - Semiannually
A . After
Q - Quarterly
BI
- Biennially
ITEM TO BE INSPECTED
ITEM
NO.
PROCEDURE
4
w
ADHESIVE WAX COATER - Cont
Drain Wax and Clean - Cont
14. Plug in ac power cord and turn MAIN switch ON.
Allow wax to melt and roller assembly to seat
i t s e l f .
Press down firmly on roller assembly when
wax has melted to seat roller.
15. Reinstall top deck cover. If wax coater is not to
be used, reinstall top roller cover.
8-6. OPERATION UNDER USUAL CONDITIONS.
For Readiness
Reporting.
Equipment Is
Not Ready/
Available If:
8-6.1 Operating Procedures.
a.
Place wax coater on firm, level surface.
Plug power cord into grounded ac
outlet.
b. Lift up top deck cover.
8-24
