Table 8-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS
B . Before
W - Weekly
AN - Annually
D - During
M - Monthly
S
- Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM
NO.
3
IN-
TER-
VAL
D
TM 5-6675-316-14
AND SERVICES - Cont
(Number) - Hundreds of Hours
ITEM TO BE INSPECTED
PROCEDURE
ADHESIVE WAX COATER - Cont
Clean Top Pressure Roller - Cont
3.
Scrape off wax from top pressure roller with
scraper.
4. Turn roller motor OFF, and place top pressure
roller in rear position.
5.
6.
7.
Soak cheesecloth with wax solvent and wipe
down surface of top pressure roller. Repeat
until all wax and dirt has been removed. Allow
roller to dry.
Place top pressure roller in original position.
Check that it is not touching coating roller
at any point.
Adjust if necessary (Paragraph 8-10.2)
Reinstall top deck cover. Reinstall top roll
cover if machine is not to be operated
immediately.
er
For Readiness
Reporting,
Equipment Is
Not Ready/
Available If:
8-19
