TM 5-6675-316-14
(1)
(2)
(3)
Mount drawing or map with arcs or circles to be digitized on table.
Set machine for manual operation (paragraph 3-6.3a).
If needed, place new paper roll or paper tape in teletype (paragraph 3-6.3g or h).
(4)
(5)
(6)
(7)
Turn teletype power switch to local.
Remove any previous programs or data from teletype and paper punch.
Turn punch off.
If paper tape is to be punched, proceed as follows.
(a) Press tape punch ON key.
(b) Press HERE IS key several times until leader holes
produced can be seen on tape.
(8) Mount dotting microscope or digitizing 1ens (table 3-4, item 5, or table 3-5, item 4).
(9) Adjust for marking/viewing.
Change 1
3-95
