TM 5-6675-316-14
(5) Remove any previous programs or data from teletype and paper punch.
(6) Turn punch off.
(7) If paper tape is to be punched, perform (a) and (b).
(a) Turn on tape punch (press ON).
(b) Press HERE IS several times to produce tape leader holes.
(8)
(9)
(10)
(11)
(12)
Mount dotting microscope or digitizing lens (table 3-4, item 5 or table 3-5, item 4).
Adjust for viewing/marking (paragraph 3-6.3 b).
NOTE
Be sure measuring system preset values and scale match drawing or map
being digitized.
Press reset key to set XY display for operation.
Turn teletype power switch to LINE.
NOTE
Fine adjustment devices may be necessary for precise positioning.
Use aiming dot of dotting microscope or digitizing Iens to locate beginning point of first line to be
digitized.
3-92
Change 1
