TM 5-6675-316-14
j. Digitizing points and/or ]ines. Basic procedure involves entering coordinates of points at beginning and end
of line with X key. Digitized data is sent to the teletype using the digitizing keyboard, via the digitizing card
cage, for recording and punching tape. Data is recorded as lines composed of drafting commands (for drawing
lines) with coordinates of points.
(1) Mount drawing or map to be digitized on table.
(2) Set machine for manual operation (paragraph 3-6.3.a).
(3) If needed, place new paper roll or paper tape in teletype (paragraph 3-6.3g or h).
(4) Turn teletype power switch to local.
Change 1
3-91
