TM 5-6675-316-14
Table 3-5. USING AUTOMATIC DRAFTING TOOLS - Cont
Tool
Operating Procedure
4. Digitizing Lens
MOUNTING
a.
Slide digitizing lens into dovetail slide mount.
NOTE
The cardboard backing on a standard notebook is approximately the correct
thickness for the following procedure.
b. Adjust height of digitizing lens above table
surface with height adjustment screw to approx-
imately 0.06 in. (1.52 mm).
c.
When digitizing lens is adjusted to desired
height, turn locking lever up to lock lens in
place.
3-89
